Full Name: Prof. Shokrieh, Mahmood M Position: Professor Phone: 98-21-7720-8127 & 98-21-77240540-50  Ex:2914 Fax: 98-21-7749-1206  &  98-21-77240488 Email: shokrieh AT iust.ac.ir Address: Iran University of Science & Technology, Tehran, IRAN

University Degrees

• PHD, McGill University, Canada.
• MSC, McGill University, canada.
• BSC, Iran University of Science & Technology

Awards & Honors

• Supervision of the Best Bachelor Thesis of the year 2005, Iranian Society of Mechanical Engineers.
• Best Research Project, National Iranian Gas Company, (2004).
• Scientific Development Award, Khatam Festival, Iran University of Science and Technology, (2004).
• Best Research Project, Iran Helicopter Support and Renewal Co (Panha Co), (2003).
• Supervision of the Best Masters Thesis of the year 2002, Iranian Society of Mechanical Engineers.
• Best Masters Thesis of the year 2002, Kharazmi Festival
• Distinguished paper of Islamic Republic of Iran Broadcasting Conference (2001).
• Distinctive Researcher, Mechanical Engineering Department, Iran University of Science and Technology, (2000).
• Selected Professor, Mechanical Engineering Department, Iran University of Science and Technology, (1999).
• Selected Professor, Iran University of Science and Technology. (1998).
• Post Doctorate, National Science and Engineering Research Council of Canada, (1995-1996).

Current Research

• Impact on Composite Structures.
• Enviromental Effects on Composite Structures.
• Creep on Composite Materials.

Experiences

• Member of Professors Promotion Committee of Iran University of Science and Technology, (2004-Now).
• Research Deputy of Mechanical Engineering Dept., Iran University of Science and Technology (1999 - 2000).
• Chairman of Iran Composites Institute (1999 - Now).
• Scientific Consultant of Fajr Research Center (1996 - 2002).
• Scientific Consultant of Presidency Technology Cooperation Office (1996 - Now).
• R& D Manager, Sap Institute, (1997 – Now).
• Chief Editor of Composites Bulletin, Iran Composites Institute (2001 - Now).
• Saba Research Center, Tehran, Iran, (R&D Manager), (1988-1990).
• Saba Research Center, Tehran, Iran, (Solid Mechanics Researcher), (1986-1988).
• Saba Research Center, Tehran, Iran, (Solid Mechanics Designer), (1985-1986).

Fields of Interest

• Mechanics of Composite Materials.
• Fatigue of Composite Materials.
• Finite Element Analysis.

Funded Research Projects

• Design and manufacturing of a composite shell under external pressure, Satari Co., 2005.
• Design and manufacturing of composite pressure vessel, Eslami Co., 2005.
• Reinforcement of corroded gas pipes, National Iranian Gas Co., 2003.
• Design and manufacturing of Composite belts of fiber optic manufacturing machine, Ghandi Co., 2004.
• Reinforcement of the heritage buildings, Iranian Ministry of Science, Research and Technology, 2005.
• Reinforcement of the engine hood of Toyota car with composites, Fath Automaker Co., 2002.
• Design and manufacturing of the canopy of a helicopter, Havanirooz, 2002.
• Reinforcement of the engine hood of Land Rover car with composites, Moratab Car Manufacturer Co., 2002.
• Technology transfer of composite wind turbine blade from Vesttas Co. to Sadid Sabaniroo, 2002.
• Design and manufacturing of an electrical switch box, Tavanir Co., 2002.
• Design and manufacturing of wind shield of a helicopter, 2001.
• Design and manufacturing of a drop weight impact tester, National Research Projects, 2001.
• Residual stresses in composite materials, Fajr Aviation and Composites Industry, 2001.
• Establishment of a design and standardization office, Sap Co., 1999.
• Design and manufacturing of a composite helicopter nose, Iran Helicopter Support and Renewal Co (Panha Co), 2000.
• Design of a composite pressure vessel, Karimi Co., 1999.
• Sensitivity analysis of composite materials, Karimi Co., 1999.

Publications - Journal Papers

• Shokrieh, M. M., and Kamali Shahri, S. M “Theoretical and Experimental Studies on Residual Stresses in Laminated Polymer Composites,” Journal of Composite Materials, 2004. Accepted
• M. M. Shokrieh and Roham Rafiee, "Simulation of Fatigue Failure in a Full Composite Wind Turbine Blade," Composite Structures, Accepted 2005.
• Mahmood M. Shokrieh and Meysam Rahmat, “On the Reinforcement of Concrete Sleepers by Composite Materials,” Composite Structures, Accepted 2005.
• Shokrieh, M. M., and Jamal Omidi, M., “Reinforcement of Metallic Plates with Composite Materials,” Journal of Composite Materials, Vol. 39, No. 8, pp. 723-744, 2005.
• Hosseinzadeh, R. Shokrieh, M. M., and Lessard, L. B., “Parametric Study of Automotive Composite Bumper Beams in Low-Velocity Impacts,” Composite Structures, 68 (2005) 419-425
• Shokrieh, M. M., and Rezaee, D., “Replacement of a Metallic Leaf Spring With a Composite Materials,” Mechanical Engineering, Vol. 12, No. 23, March 2004, pp. 10-13.
• Shokrieh, M. M., and Hasani, A., “Study of Shear Buckling of Composite Shafts under Torsion,” Composite Structures, Vol. 64/1 pp. 63-69, 2004.
• Shokrieh, M. M., and Rezaee, D., “Analysis and Optimization of a Composites Leaf Spring,” Composite Structures, 60, (2003), pp. 317-325
• Hassani, F., Shokrieh, M. M., and Lessard, L. B., “A Fully Non-Linear 3-D Constitutive Relationship for the Stress Analysis of a Pin-Loaded Composite Laminate,” Composites Science and Technology, 62 (2002), pp. 429-439.
• Shokrieh, M. M., and Sokhanvar H. R., “Optimum Fiber Volume Fraction of Composite Materials, using Compressive Properties,” in Persian, International Journal of Engineering Science, .No. 3, Vol. 14, pp. 59-74, 2003.
• Shokrieh, M. M., and Mozafari, M., “Study of Residual Compressive Strength of a Glass/Epoxy Plate under Low Velocity Impact,” Engineering Journal of Tehran University, Vol. 36, No. 3, pp. 409-416, 2002.
• Shokrieh, M. M., and Bohlool, A., “Sensitivity of Classical Laminated Plate Theory to Variation of Mechanical Properties of Unidirectional plies,” International Journal of Engineering Science, No. 5, Vol.13, Fall 2002, pp. 81-91.
• Shokrieh, M. M., and Haghiri, K., “Design and Failure Analysis of Composite Pressure Vessels using Effective Parameters,” International Journal of Engineering Science, In Persian, Vol. 12, No. 4, pp.71-80, 2002
• Shokrieh, M. M., and Taheri Behrooz, F., “Wing Instability of a Full Composite Aircraft,” Composite Structures, 54, pp. 335-340. 2001
• Shokrieh, M. M., and Taheri Behrooz, F., “Study on Bending-Torsion Flutter of wing of a Full Composite Aircraft,” International Journal of Engineering Science, In Persian, Vol. 12, No. 3, pp.11-22, 2001.
• Shokrieh, M. M., and Taheri Behrooz, F., “Study on Wing Bending-Aileron Rotation Flutter of a Full Composite Aircraft,” International Journal of Engineering Science, In Persian, Vol. 12, No. 1, pp.153-162, 2001.
• Shokrieh, M. M., and Bohlool, A., “Sensitivity of Finite Element Method to Variation of Mechanical Properties of Unidirectional plies,” in Persian, International Journal of Engineering Science, No. 3, Vol. 13, pp. 135-143, 2002.
• Shokrieh, M. M., and Lessard, L. B., “Progressive Fatigue Damage Modeling of Composite Materials, Part I: Modeling,” Journal of
• Shokrieh, M. M., and Lessard, L. B., “Progressive Fatigue Damage Modeling of Composite Materials, Part II: Material Characterization and Model Verification,” Journal of Composite Materials, Vol. 34, No. 13, pp. 1081-1116, (2000).
• Shokrieh, M. M., and Mohamadi-Rad H., “The Effect of Sealing Liner on Mechanical Behavior of Composite Vessels under Internal Pressure,” International Journal of Engineering Science, In Persian. Vol. 10, No. 7, pp. 59-72, 1999.
• Diao, X., Lessard, L. B., and Shokrieh, M. M., “Statistical Model for Multiaxial fatigue Behavior of Unidirectional Plies,” Composites Science and Technology, 59, (1999), pp. 2025-2035.
• Shokrieh, M. M., and Mohamadi-Rad H., “The Effect of Internal Liner on Mechanical Behavior of Composite Pressure Vessels,” Proceedings of ICCM-12, 12th International Conference on Composite Materials, France, 1999.
• Shokrieh, M. M., and Lessard, L. B., “An Assessment of the Double-Notch Shear Test for Interlaminar Shear Characterization of Unidirectional Graphite/Epoxy Under Static and Fatigue Loading,” Applied Composite Materials, Vol. 5, No. 1, 1998, pp. 46-63.
• Shokrieh, M. M., and Lessard, L. B., “Modification of the Three-Rail Shear Test for Composite Materials under Static and Fatigue Loading,” 13th Symposium on Composite Materials: Testing and Design, ASTM STP 1242, pp. 217-233,1997.
• Shokrieh, M. M., Eilers, O., and Lessard, L. B., “Characterization of a Graphite/Epoxy Composite under In-Plane Shear Fatigue Loading,” High Temperature & Environmental Effects on Polymeric Composites: Second Symposium, STP 1302, pp. 133-148, 1997.
• Shokrieh, M. M., and Lessard, L. B., “Multiaxial Fatigue Behaviour of Unidirectional Plies Based on Uniaxial Fatigue Experiments I. Theory,” International Journal of Fatigue, Vol. 19, No. 3, pp. 201-207, 1997.
• Shokrieh, M. M., and Lessard, L. B., “Multiaxial Fatigue Behaviour of Unidirectional Plies Based on Uniaxial Fatigue Experiments II. Experimental Evaluation,” International Journal of Fatigue, Vol. 19, No. 3, pp. 209-217, 1997.
• Shokrieh, M. M., and Lessard, L. B., “Effects of Material Nonlinearity on the Three-Dimensional Stress State of Pin-Loaded Composite Laminates,” Journal of Composite Materials, Vol. 30, No. 7, pp. 839-861, 1995
• Lessard, L. B., Schmit, A. S., and Shokrieh, M. M., “Three-Dimensional Stress Analysis of Free-Edge Effects in a Simple Composite Cross-Ply Laminate,” Int. Journal of Solids and Structures, Vol. 33, No. 15, pp. 2243-2259, 1996.
• Lessard, L. B., Shokrieh, M. M., “Two-Dimensional Modeling of Composite Pinned/Bolted Joint Failure,” Journal of Composite Materials, Vol. 29, No. 5, 1995, pp. 671-697.
• Lessard, L. B., Eilers, O. P., and Shokrieh, M. M., “Testing of In-plane Shear Properties Under Fatigue Loading,” Journal of Reinforced Plastics and Composites, Vol. 14, No. 9, 1995, pp. 965-987.

Publications - Conference Proceedings

• Shokrieh, M. M., H. Nosrati and M. Akhbari, “Tensile Strength Studies of Woven Fabric Polyester/ Polyester Composites,” The 8th Asian Textile Conference, Textile and Modern Sciences, p. 94, Tehran, Iran, May 9-11, 205.
• Shokrieh, M. M., and R. Rafiee, “Extraction of Mechanical Properties of Multidirectional Composites using Classical Lamination Theory”, the Fifth Canadian-International Composites Conference in Vancouver, BC, Canada. Submitted and accepted
• Shokrieh, M. M., and M. Rahmat, “Composite Material Reinforcement of Concrete Sleepers under 3-point Bending Conditions,” the IV-th Moscow International Conference, Theory and Practice of technologies of Manufacturing Composite Materials and New Metal All
• Shokrieh, M. M., and F. Taheri B. and R. Moslemian, “Reinforcement of Corroded Gas Pipes using Composite Materials,” in Persian, 13th annual (international) conference on Mechanical Engineering in Isfahan, Iran, P. 308, 2005.
• Shokrieh, M. M., and Ghasemi, A. R., “Calibration Factors Determination for Central Hole Drlling Method to Measure Residual Stresses in Isotropic and Orthotropic Materials,” In Persian, 13th annual (international) conference on Mechanical Engineering in I
• Shokrieh, M. M., and R. Rafiee, “Stochastic fatigue Analysis of a Horizontal Axis Wind Turbine Composite Blade,” Fifth International Conference on Composite Science and Technology, American University of Sharjah, 1-3 February, 2005, pp. 197-202.
• Shokrieh, M. M., and A. Najafi, “Damping Characterization of Polymer Matrix Composites Based on Micromechanics Approach, Theory and Experiment,” Fifth International Conference on Composite Science and Technology, American University of Sharjah, 1-3 Februa
• Najafi A., Shokrieh, M. M., , Ghannadpour, S. A. M. and Mohammadi B., “The effect of Circular/Elliptical Cutouts on the Buckling Behavior of Laminated Composites Plates,” Fifth International Conference on Composite Science and Technology, American Univers
• Mohammadi, B., Ghannadpour, S. A. M., Shokrieh, M. M., and A. Najafi, “The Post Buckling analysis of Laminated Composites Containig Circular/Elliptical Holes,” Fifth International Conference on Composite Science and Technology, American University of Shar
• Shokrieh, M. M., and Mohammad R. Sareban, “A Method for Internal reinforcement of Concrete with Composite Materials Waste,” Conference on Application of FRP Composites in Construction and Rehabilitation of Structures, pp. 19-29, May 4, 2004, In Persian.
• Shokrieh, M. M., and Rafiee, R., “Life Prediction of a Composite Horizontal Axis Wind Turbine Blade,” Annual International Mechanical Engineering Conference, Tehran, in Persian, pp. 240, 2004.
• Shokrieh, M. M., and Kamali Shahri, S. M., “Residual stresses in Thermoset Polymer Composites” The Second International Conference on Structural Engineering Mechanics and Computation, 5-7 July 2004, Cape Town,. South Africa, p. 47.
• Shokrieh, M. M., and A. Rezaee Azariani, “Effect of Flame on the Fiber Reinforced Polymers,” Proceedings of Fire Protections of Buildings, Building and Housing Research Center, Tehran, Iran, pp. 55-66, 2004, In Persian.
• Shokrieh, M. M., and Jamal Omidi, M., “Reinforcement of Aluminum Cracked Plates Using Carbon/Epoxy Composites,” Second International and Fifth National Conference of Iranian Aerospace Society, 2004, in Persian.
• Shokrieh, M. M., and Kamali Shahri, S. M., “Study of Classical Method in Determination of Residual stresses in Composite Materials” Aero 2003, The Fourth Iranian Aerospace Society Conference, pp. 382-391, 2003, In Persian.
• Shokrieh, M. M., and Ali Babaee S., “Design and Manufacturing of Hybrid Composite Belt for a Weaving Machine,” In Persian, Proceedings of the Sixth Conference of Manufacturing and Production Engineering, 2003.
• Shokrieh, M. M., and Chahardehi A. E., “Reinforcement of Spherical Vessels using Composite Materials,” Proceedings of the Sixth Conference of Manufacturing and Production Engineering, 2003, In Persian
• Shokrieh M. M., Taheri Behrooz, F, and Fadaee Arasi, M., “Measurement of Hygro-thermal Properties of Aramid/Epoxy Composite for Cylindrical Specimens and evaluation of Feek Equation,” Proceedings of the 11 th Annual Conference (International) of Mechanica
• Shokrieh M. M., and Seidi, A., “Design of Skid of Bell 214 Helicopter Using Composites,” Proceedings of the 11 th Annual Conference (International) of Mechanical Engineering,” Iran, Mashhad, pp. 1264-1270, 2003, In Persian.
• Shokrieh M. M., and Zakeri, M., “Evaluation of Fatigue Life of Composite Materials using Progressive Damage Modeling and Stiffness Reduction,” Proceedings of the 11 th Annual Conference (International) of Mechanical Engineering,” Iran, Mashhad, pp. 1256-1
• Shokrieh M. M., and Paryab, N., “Repair and Reinforcement of Gas Pipes using Composite Materials,” Proceedings of the 11 th Annual Conference (International) of Mechanical Engineering,” Iran, Mashhad, pp. 45-52, 2003, In Persian.
• Shokrieh, M. M., and Hasani, A., “Shear Buckling of Composite Drive Shafts under Torsion,” The Sixth International Conference on Flow Process in Composite Materials (FPCM-6), Auckland, New Zealand, 15-17 July, 2002.
• Shokrieh, M. M., and Mahmoudi, J., “Shear Creep in Composite Materials,” Proceedings of the 10th Annual International Mechanical Engineering Conference, Tehran, Vol. 4, pp. 2321-2328, May 25-27, 2002, in Persian.
• Shokrieh, M. M., and Ghasemi, A., “Aerodynamic Design and Static Analysis of a Composite Wind Turbine Blade” Proceedings of the 10th Annual International Mechanical Engineering Conference, Tehran, Vol. 4, pp. 2335-2342, in Persian, May 25-27, 2002.
• Shokrieh, M. M., and Mousavi Malevajerdi S. A., “Study of Bending Behaviour of Reinforced Concrete Beams, Strengthened with Glass/Epoxy and Polyester /Epoxy Composites,” The 1st Conference & Retrofitting of Structures, Submitted and Accepted, in Persian,
• Shokrieh, M. M., and Mozafari, M., “Residual Compressive Strength of Composite Plates under Impact Loading,” Third Canadian International Composites Conference, 21-24 Aug. 2001, Montreal, Quebec, Canada.
• Shokrieh, M. M., and Rafiee, R., “Structural Design of Composite Transmission Poles,” International Conference on Materials for Advanced Technologies (ICMAT 2001), Singapore, 1-6 July 2001
• Shokrieh, M. M., and Rafiee, R., “Design and Analysis of a Composite Transmission Pole,” In Persian, Proceedings of 5th International & 9th Annual Mechanical Engineering Conference, Iran, Rasht, Vol. 1, pp. 77-84, 2001.
• Shokrieh, M. M., Seyed A. Mousavi Malevajerdi, “Strengthening of Reinforced Concrete Beams Using Composite Laminates,” International Conference on FRP Composites in Civil Engineering, Hong Kong, 12-14 Dec. 2001.
• Shokrieh, M. M., and Seyed A. Mousavi Malevajerdi, “Strengthening of Reinforced Concrete Structures Using Composite Plates,” In Persian, Concrete and Development First International Conference, pp. 235-251, April-May, 2001.
• Shokrieh, M. M., and Bohlool, A., “Effects of Mechanical Properties of Unidirectional Plies on Stress Analysis of Composite Structures,” ACCM-2000, Second Asian-Australasian Conference on Composite Materials, 18-20 Aug. 2000, Korea, Kyongju, pp.535-542.
• Shokrieh, M. M., and Haghiri, K., “Effective Parameters on Optimum Design of Composite Pressure Vessels,” ECCM9, Composites - From Fundamentals to Exploitation, The Premier Composites Conference in Europe, 4-7 June 2000, Brighton, England.
• Shokrieh, M. M., and Sadrabadi, B. B., “Design of a Composite Telescopic Mast,” First Seminar on Design, Manufacturing, Installation and Protection of Radio and Television Masts, IRIB of Islamic Republic of Iran, pp. 1-6, 1999.
• Shokrieh, M. M., and Taheri Behrooz, F., “Wing Instability of a Full Composite Aircraft,” Third International Conference on Composite Science and Technology, Sampe-2000, Moscow, Russia, pp. 730-743, 2000
• Shokrieh, M. M., Maghsoudi, M., and S. M. Tajali Bakhsh, “ A Study on Adhesive Joints of Laminated Composites,” Sixth Annual Mechanical Engineering Conference and Third International Mechanical Engineering Conference of the Iranian Society of Mechanical E
• Shokrieh, M. M., and Lessard, L. B., “Residual Fatigue Life Simulation of Laminated Composites,” International Conference on Advanced Composites 98, Egypt,, 1998, pp. 79-86.
• Shokrieh, M. M., “Fatigue Damage Modeling of Mechanical Joints Made of Composite Materials,” Aviation 2000, International Symposium, Zhukovsky, Moscow, Russia, August 19-24, 1997, pp. 343-351
• Shokrieh, M. M., Lessard, L. B., and C. Poon, “Three-Dimensional Progressive Failure Analysis of Pin/Bolt Loaded Composite Laminates,” AGARD Symposium, Meeting on Bolted/Bonded Joints in Polymer Composites Florence, Italy, pp. 7-1 - 7-10, 1996.
• Shokrieh, M. M, and Lessard, L. B., “Progressive Fatigue Modeling of Laminated Composite Pinned/Bolted Connections,” Proceedings of ICCM-11, 11th International Conference on Composite Materials, Australia, Vol. II: Fatigue, Fracture and Ceramic Matrix Com
• Lessard, L. B., and Shokrieh, M. M., “Overview of Failure in Composite Materials,” Applied Mechanics in Americas, Vol. III, pp. 255-260., Edited by L. A. Godoy, S. R. Idelsohn, and P. A. A. Laura, and D. T. Mook, AAM, and AMCA, Santa Fe, Argentina, 1995,
• Shokrieh, M. M., Eilers, O. P., and Lessard, L. B., “Determination of interlaminar Shear Strength of Graphite/Epoxy Composite Materials in Static and Fatigue Loading,” Proceedings of ICCM-10, 10th International Conference on Composite Materials, Whistler,
• Milette J. F., Shokrieh M. M. and Lessard L. B., “Static and Fatigue Behaviour of Unidirectional Composites in Compression,” Proceedings of ICCM-10, 10th International Conference on Composite Materials, Whistler, B. C., Canada, 1995, pp. I-617 -- I-624.
• Shokrieh, M. M., and Lessard, L. B., “Residual Strength and Fatigue Life of Unidirectional Composite Plies under Multiaxial Fatigue Loading,” SAMPE, Atlanta, 1994, pp. 303-314
• Shokrieh, M. M., and Lessard, L. B., “Fatigue Behaviour of Composite Pinned / Bolted Joints - New Modeling Approach,” Cancom 93, Ottawa, Canada, (1993), pp. 871-877.
• Lessard, L. B., and Shokrieh, M. M., Esbensen, J. H., “Analysis of Stress Singularities in Laminated Composite Pinned/Bolted Joints,” 38th SAMPE Symposium and Exhibition, May 10-13, (1993), Anaheim, California, pp. 53-60.
• Lessard, L. B., Shokrieh, M. M., and Schmit, A. S., “Three Dimensional Stress Analysis of Composite Plates With or Without Stress Concentrations,” 9th International Conference on Composite Materials, 12-16 July, (1993) Madrid, Spain, pp. 243-250.
• Lessard, L. B., and Shokrieh, M. M., “Failure of Laminated Composite Materials,” International Conference on Engineering Applications of Mechanics, Tehran, Iran, (1992), pp. 475-483.
• Lessard, L. B., and Shokrieh, M. M., “Pinned Joint Failure Mechanisms, Part I - Two Dimensional Modeling,” First Canadian International Composites Conference and Exhibition, CANCOM 91, Montreal, Canada, (1991), pp. 15D1-15D8.

Courses Taught

• Design of Aircraft Structures
• Engineering Mechanics, Statics
• Introduction to Mechanics of Composite Materials
• Mechanics of Materials
• Theory of Elasticity